Web Camera
User Manual
User Manual
Thank you for purchasing our product. If there are any
questions, or requests, do not hesitate to contact the
dealer.
This manual may contain several technical mistakes or
printing errors, and the content is subject to change
without notice. The updates will be added to the new
version of this manual. We will readily improve or
update the products or procedures described in the
manual.
01000020221201
© 2022 Hangzhou Hikvision Digital Technology Co., Ltd.
All rights reserved.
About this Manual
The Manual includes instructions for using and
managing the Product. Pictures, charts, images and all
other information hereinafter are for description and
explanation only. The information contained in the
Manual is subject to change, without notice, due to
firmware updates or other reasons. Please find the
latest version of this Manual at the Hikvision website
(https://www.hikvision.com/).
Please use this Manual with the guidance and
assistance of professionals trained in supporting the
Product.
Trademarks
and other Hikvision’s trademarks and
logos are the properties of Hikvision in various
jurisdictions.
Other trademarks and logos mentioned are the
properties of their respective owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE
LAW, THIS MANUAL AND THE PRODUCT DESCRIBED,
WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE
PROVIDED “AS IS” AND “WITH ALL FAULTS AND
ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING WITHOUT LIMITATION,
MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS
FOR A PARTICULAR PURPOSE. THE USE OF THE
PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT
WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,
INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF
BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS
OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF
DOCUMENTATION, WHETHER BASED ON BREACH OF
CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT
LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE
USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR
LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE
INTERNET PROVIDES FOR INHERENT SECURITY RISKS,
AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES
FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR
OTHER DAMAGES RESULTING FROM CYBER-ATTACK,
HACKER ATTACK, VIRUS INFECTION, OR OTHER
INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL
PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE
WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY
RESPONSIBLE FOR ENSURING THAT YOUR USE
CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU
ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A
MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF
THIRD PARTIES, INCLUDING WITHOUT LIMITATION,
RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS,
OR DATA PROTECTION AND OTHER PRIVACY RIGHTS.
YOU SHALL NOT USE THIS PRODUCT FOR ANY
PROHIBITED END-USES, INCLUDING THE DEVELOPMENT
OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION,
THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR
BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE
CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR
UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF
HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS
MANUAL AND THE APPLICABLE LAW, THE LATTER
PREVAILS.
Regulatory Information
FCC Information
Please take attention that changes or modification not
expressly approved by the party responsible for
compliance could void the user’s authority to operate
the equipment.
FCC compliance
This product has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation.
This product generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this product does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and
receiver.
—Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV
technician for help.
FCC Conditions
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received,
including interference that may cause undesired
operation.
EU Conformity Statement
This product and - if applicable - the
supplied accessories too are marked with
"CE" and comply therefore with the
applicable harmonized European
standards listed under the Low Voltage Directive
2014/35/EU, the EMC Directive 2014/30/EU, the RoHS
Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products
marked with this symbol cannot be
disposed of as unsorted municipal waste in
the European Union. For proper recycling,
return this product to your local supplier
upon the purchase of equivalent new
equipment, or dispose of it at designated collection
points. For more information see: www.recyclethis.info.
2006/66/EC (battery directive): This product contains a
battery that cannot be disposed of as
unsorted municipal waste in the European
Union. See the product documentation for
specific battery information. The battery is
marked with this symbol, which may include lettering to
indicate cadmium (Cd), lead (Pb), or mercury (Hg). For
proper recycling, return the battery to your supplier or
to a designated collection point. For more information,
see: www.recyclethis.info.
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A)
standards requirements.
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation is subject to
the following two conditions:
1.this device may not cause interference, and
2.this device must accept any interference, including
interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radioexempts de
licence. L'exploitation est autorisée aux deux conditions
suivantes:
1. l'appareil ne doit pas produire de brouillage, et
2. l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
Warning
This is a class A product. In a domestic environment this
product may cause radio interference in which case the
user may be required to take adequate measures.
Safety Instruction
These instructions are intended to ensure that user can
use the product correctly to avoid danger or property
loss.
The precaution measure is divided into “Warnings” and
“Cautions”.
Warnings: Serious injury or death may occur if any of
the warnings are neglected.
Cautions: Injury or equipment damage may occur if any
of the cautions are neglected.
Warnings
Laws and Regulations
The device should be used in compliance with local laws,
electrical safety regulations, and fire prevention
regulations.
Electrical Safety
The socket-outlet shall be installed near the equipment
and shall be easily accessible.
The wiring system of the building should be facilitated
with easy-to-use power-off devices.
Cautions
Fire Prevention
Warnings Follow
these safeguards to
prevent serious injury
or death.
Cautions Follow these
precautions to prevent
potential injury or
material damage.
No naked flame sources, such as lighted candles, should
be placed on the equipment.
The device will be charged by specified source which
the output circuit comply with LPS/PS 2.
Installation
Install the equipment according to the instructions in
this manual.
Never place the equipment in an unstable location. The
equipment may fall, causing serious personal injury or
death.
DO NOT touch the sharp edges or corners.
Transportation
Keep the device in original or similar packaging while
transporting it.
DO NOT drop the product or subject it to physical
shock.
Power Supply
Refer to the device label for the standard power supply.
Please make sure your power supply matches with your
device.
Maintenance
If the product does not work properly, please contact
your dealer or the nearest service center. We shall not
assume any responsibility for problems caused by
unauthorized repair or maintenance.
Cleaning
Please use a soft and dry cloth to clean the interior and
exterior surfaces. Do not use alkaline detergents.
Using Environment
The device contains magnets. Keep the valuables and
the precise products away from the device.
When any laser equipment is in use, make sure that the
device lens is not exposed to the laser beam, or it may
burn out.
DO NOT aim the lens at the sun or any other bright
light.
To avoid heat accumulation, good ventilation is required
for a proper operating environment.
DO NOT expose the device to extremely hot, cold, dusty,
corrosive, saline-alkali, or damp environments. For
temperature and humidity requirements, see device
specification.
DO NOT expose the device to high electromagnetic
radiation.
DO NOT touch the heat dissipation component to avoid
burns.
DO NOT install indoor product where it may get wet by
water or other liquid.
Emergency
If smoke, odor, or noise arises from the device,
immediately turn off the power, unplug the power cable,
and contact the service center.
Hearing Safety
To prevent possible hearing damage, do not listen at
high volume levels for long periods.
To achieve a better product experience, please visit
https://www.hikvision.com/sg/support/download/soft
ware/hikin/ to download the HIK IN installation
package.
1 Introduction
1.1 Product Features
Key features of the device include:
High-performance CMOS
Sharp and high-quality images
AGC for self-adaptive brightness
Built-in microphone with clear sound
USB interface. Plug-and-play, no need to install driver
software
360° horizontal rotation
1.2 Packing List
Check the package contents and make sure that the
device in the package is in good condition and all the
assembly parts are included.
Table 1-1 Packing List
No.
Item
Description
Amount
1
Camera
1
2
USB Cable
1
3
Quick Start Guide
1
4
Cardboard
1
1.3 Overview
1
7
3
4
5
2
6
Figure 1-1 Appearance
Table 1-1 Description
No.
Description
No.
Description
1
Main Body
5
Microphone
2
Speaker
6
Bracket
3
Lens
7
USB Cable
4
Indicator
Notes:
The indicator is solid white when normally working,
and the indicator is off when stand by.
It is recommended to peel off the protective film
before using.
2 Installation
Before you start
Make sure that the device in the package is in good
condition and all the assembly parts are included.
Check the specification of the products for the
installation environment.
If the product does not function properly, contact
your dealer or the nearest service center. DO NOT
disassemble the camera for repair or maintenance by
yourself.
2.1 Angle Adjustment
The device can be adjusted as shown in Figure 2-1.
-15°~15°
0°~180°
15°15°
360° Horizontal Rotation
Figure 2-1 Angle Adjustment
2.2 Mounting Methods
2.2.1 Place on the Desktop
You can place the device on the desktop in the
following way.
Figure 2-2 Place the Device on the Desktop
2.2.2 Clamp on the Display
You can clamp the device on the display of different
thickness.
Figure 2-3 Clamp the Device on the Display
2.2.3 Install to the Bracket
You can also install the device to bracket through
1/4-20UNC-2B screw hole.
Figure 2-4 Install the Device to the Bracket
Note:
The bracket shall be purchased separately.
2.2.4 Connection
Plug the device to the USB 3.0 interface in computer.
Note:
Refer to Chapter 4 FAQ for more information about USB
3.0 interface.
USB 3.0
Figure 2-5 Connection
3 Setup Guide
Steps:
1. Power on the device and open the conference/video
software.
2. Select the Microphone as 1080P USB Camera-Audio,
and select the Camera as 1080P USB Camera.
Note:
Take the actual product name as standard.
4 FAQ
For frequently asked questions of the device, visit
http://enpinfodata.hikvision.com/analysisQR/showQR/
35d08787
Note that some frequently asked questions only apply to certain
models.
UD26949B-A
