ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
SS1 Issue:2 (HF) - 31/07/18
Original Language Version
© Jack Sealey Limited
Refer to instruction
manual
Wear eye
protection
Wear protective
gloves
Wear a mask
HAND PRESSURE SPRAYER 1.5ltr
Model No: SS1
1. SAFETY
NOTE!: This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or
lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a
person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. The Sealey Hand
Pressure Sprayer Model No SS1 is safe and only becomes a safety issue when used with toxic fluids. The following safety instructions
are bulletin points and cannot cover every aspect of user safety.
Be aware of the safety requirements (C.O.S.H.H.) for the fluids contained in the vessel.
Wear safety equipment as advised in (C.O.S.H.H.) statements.
Do read and follow all the fluid manufacturers instructions for application and safe use.
Store the vessel inside an outbuilding away from foodstuffs and out of reach of children.
Label vessel with chemical used, even if water. It is highly recommended that individual
vessels should be used for individual chemicals. Cross contamination can give
unexpected results. Also possible spillages are avoided in transferring liquids.
DO NOT spray at people, animals, protected insect species, in high winds, at
naked flames or sources of heat.
DO NOT use the pressure sprayer for any purpose other than for which it is designed.
DO NOT use whilst eating, drinking, smoking; under the influence of drugs, alcohol,
intoxicating medication, or if fatigued.
DO NOT use to spray flammable liquids, solvents etc..
2. INTRODUCTIONi
Ideal for spraying a wide variety of uids including water, herbicides, pesticides, insecticides,
fungicides and solvent-free preservative treatments. Features ergonomic handle and pressure
relief valve. Fitted with adjustable nozzle to switch between mist and jet settings.
3. OPERATIONp
3.1. Grip the handle and rotate the vessel to separate or grip the handle and rotate the vessel.
3.2. Avoiding spillages fill to, 1.5L maximum or required volume.
3.3. Re-attach vessel keeping vertical, rotate until hand tight against neck seal. Pressurise
unit by operating pump plunger until resistance is felt.
3.4. Attach a label with contents indicated.
3.5. Operate the trigger to spray and rotate the nozzle to obtain desired spray mode.
3.6. After use, operate pressure relief valve to depressurise vessel.
3.7. Flush externally with water to clean off residuals and store safely after use.
To ll, grip handle & turn vessel
Tighten
Undo
Pressurise
125mm stroke
Operating
Trigger
Pressure relief button
Bespoke
contents
label
CW jet-mist-
off.
ACW on-
mist-jet
Pump plunger
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
