Loading ...
Loading ...
Loading ...
Go to Conguraon → System → System Sengs → Power Consumpon Mode , select the
desired power consumpon mode.
Full Consumpon Mode
The device works with all the funcons enabled.
Low Consumpon Real-Time Mode
The device DSP works normally. It records the videos with the main stream at the half frame
rate, and supports the remote login, preview and the conguraon.
Low Power Sleep
When the device power is lower than Threshold of Low Power Sleep Mode, the device enters
sleep mode.
When the device power is recovered to 10% above the threshold, the device enters the user
conguraon mode.
Scheduled Sleep
If the device is during Scheduled Sleep Time, it enters the sleep mode, otherwise it enters the
user conguraon mode.
Note
For the scheduled sleep schedule sengs, see Arming Schedule and Alarm Linkage .
The device supports the ming wake. For the details, see Set Timing Wake .
9.16 External Device
For the device supporng external devices, including the supplement light, wiper on the housing
and the LED light, you can control them via the Web browser when it is used with the housing.
External devices vary with models.
Brightness
Adjust Low Beam Brightness and High Beam Brightness according to the actual scene.
Timing
The LED light will be turned on by the schedule you set. You should set Start Time and End
Time.
Auto
The LED light will be turned on according to the environment illuminaon.
9.16.1 Supplement Light Sengs
You can set supplement light and refer to the actual device for relevant parameters.
Smart Supplement Light
Network Camera User Manual
78
Loading ...
Loading ...
Loading ...