User Manual FLUKE 9144-C-156 Field Metrology Well with C Insert Model 9144-INSC, 50 to 660°C

Documents for FLUKE 9144-C-156

User Manual for the Fluke 9144-C-156 Field Metrology Well with C Insert Model 9144-INSC, 50 to 660°C

For 9144-C-156.

• 1 Before You Start7
  • 1.1 Introduction7
  • 1.2 Unpacking8
  • 1.3 Symbols Used9
  • 1.4 Safety Information10
    • 1.4.1 Warnings11
    • 1.4.2 Cautions13
  • 1.5 CE Comments14
    • 1.5.1 EMC Directive14
    • 1.5.2 Immunity Testing14
    • 1.5.3 Emission Testing15
    • 1.5.4 Low Voltage Directive (Safety)15
  • 1.6 Authorized Service Centers15
• 2 Specifications and Environmental Conditions19
  • 2.1 Specifications19
  • 2.2 Environmental Conditions21
• 3 Quick Start23
  • 3.1 Setup23
  • 3.2 Parts and Controls24
    • 3.2.1 Display Panel25
    • 3.2.2 Display26
    • 3.2.3 Power Panel28
    • 3.2.4 -P Option Panel (-P models only)30
  • 3.3 Languages32
    • 3.3.1 Language Selection32
    • 3.3.2 Reset to English Language33
• 4 Menu Structure35
  • 4.1 Temp Setup Menu35
  • 4.2 Prog Menu36
    • 4.2.1 Switch Test Parameters37
    • 4.2.2 Switch Test Description37
  • 4.3 System Menu39
  • 4.4 Input Setup (-P only)40
• 5 Maintenance41
  • 5.1 Field Metrology Well Performance Analysis41
• Table 1 Symbols used9
  • Table 2 Base Unit Specifications19
  • Table 3 -P Option Specifications20
• Figure 1 Clamp-on ferrite installation15
• Figure 2 914X Field Metrology Well24
• Figure 3 Display panel and keys26
• Figure 4 914X display27
• Figure 5 9142 power panel29
• Figure 6 9143 and 9144 power panel29
• Figure 7 -P option panel30
• Figure 8 Probe connector wiring31
• Figure 9 Jumper locations for 3-wire and 2-wire connections32
• Figure 10 Steps to language selection33
• Figure 11 Main Menu - Temp SetUp35
• Figure 12 Main Menu - Prog Menu36
• Figure 13 Auto and manual switch test operation example38
• Figure 14 Main Menu - System Menu39
• Figure 15 Main Menu - Input Setup40