Loading ...
Loading ...
Loading ...
14
5. With the steel clamp and screw,
secure the water supply line (copper
tubing only) to the rear panel of
appliance as shown.
6. Coil the excess water supply line
(copper tubing only), about 2½ turns,
behind appliance as shown and
arrange coils so they do not vibrate or
wear against any other surface.
7. Turn ON the water supply at shuto
valve and tighten any connections
that leak.
8. Reconnect the appliance to electri-
cal power source.
9. To turn ice maker on, press and hold
ICE MAKER on the appliance display
for 3 seconds.
NOTE
Check with your local building au-
thority for recommendations on water
lines and associated materials prior to
installing your new appliance. Depend-
ing on your local/state building codes,
Frigidaire recommends for homes with
existing valves its Smart Choice
®
water
line kit 5305513409 (with a 6�Stain-
less Steel Water Line) and for homes
without an existing valve, Frigidaire
recommends its Smart Choice
®
water
line kit 5305510264 (with a 20�copper
water line with self-tapping saddle
valve). Please refer to Frigidaire.com for
more information.
WATER SUPPLY CONNECTION
Loading ...
Loading ...
Loading ...