Loading ...
Loading ...
Loading ...
Network Camera User Manual
87
Anonymous Access to the FTP Server (in which case the user name and password
will not be required.): Check the Anonymous checkbox to enable the anonymous
access to the FTP server.
Note: The anonymous access function must be supported by the FTP server.
7. Check Enable Automatic Network Replenishment. Upload to FTP/Memory
Card/NAS in Linkage Method and Enable Automatic Network Replenishment
should be both enabled simultaneously.
8. Click Save to save the settings.
7.2.3 Configuring Email Settings
Purpose:
The system can be configured to send an Email notification to all designated receivers
if an alarm event is detected, e.g., motion detection event, video loss, video tampering,
etc.
Before you start:
Please configure the DNS Server settings under Configuration > Network > Basic
Settings > TCP/IP before using the Email function.
Steps:
1. Enter the TCP/IP Settings (Configuration > Network > Basic Settings > TCP/IP) to
set the IPv4 Address, IPv4 Subnet Mask, IPv4 Default Gateway and the Preferred
DNS Server.
Note: Please refer to 7.1.1 Configuring TCP/IP Settings for detailed information.
2. Enter the Email Settings interface: Configuration > Network >Advanced
Settings > Email.
3. Configure the following settings:
Sender: The name of the email sender.
Sender’s Address: The email address of the sender.
SMTP Server: IP address or host name (e.g., smtp.263xmail.com) of the SMTP
Server.
Loading ...
Loading ...
Loading ...