Loading ...
Loading ...
Loading ...
Part 1 – Introduction
12
4
RJ45 waterproof rubber ring
RJ45 modular jack
RJ45 connector protect cover
4
Connect the plug terminal to the RJ45 jack.
5
RJ45 waterproof rubber ring
RJ45 modular jack
RJ45 connector protect cover
5
Push the waterproof cap body and cap into the RJ45
jack and rotate it.
6
RJ45 waterproof rubber ring
RJ45 modular jack
RJ45 connector protect cover
6
Lock the waterproof cap into the waterproof cap
body.
Not pulling the cable back may cause water to seep in
and damage the product.
Installation
• Check the wall or ceiling to see if it needs to be
reinforced. The camera may fall o if the wall or
ceiling is not strong enough to support its weight.
• Install the camera in a shaded area. If the camera
is installed in direct sunlight, it may be aected
adversely.
• (If necessary) Attach one end of the safety wire (not
provided) to the wall or ceiling, and the other end
of the safety wire to the installation location on the
camera body.
Safety Wire Screw (Provided)
Safety Wire (Not provided)
1
Use the screws, anchor provided with the camera to
secure the install bracket on a wall or a ceiling.
Use the provided guide pattern to check the
distance between the screws.
2
Connect external devices, the network cable, and
the power adapter.
3
Adjust the angle. For more information, refer to the
Angle Adjustment.
Loading ...
Loading ...
Loading ...