Loading ...
Loading ...
Loading ...
Figure 9-2 Manual Sengs
Note
This funcon may vary according to dierent device models.
9.18 Wiegand
Note
This funcon is only supported by certain camera models.
Check Enable and select the protocol. The default protocol is SHA-1 26bit.
If enabled, the recognized license plate number will be output via the selected Wiegand protocol.
9.19 Power Consumpon Mode
It is used to switch the power consumpon when the device is working.
Note
The funcon is only supported by certain camera models.
Go to Conguraon → Proacve Mode → Power Consumpon Mode , select the desired power
consumpon mode.
Performance Mode
The device works with all the funcons enabled.
Standby Mode
The device only support certain funcons and does not support seng the funcons.
Note
Some devices only support remote access wake-up and guarding schedule funcons in this
mode.
Proacve Mode
Network Camera User Manual
80
Loading ...
Loading ...
Loading ...