Loading ...
Loading ...
Loading ...
Thermal Imagers
Maintenance
17
Note
To extend battery life, Auto-Sensing automatically adjusts backlight
brightness based on ambient light levels.
Maintenance
The Imager supplies maintenance-free operation. However, some precautions
should be followed to get the best and longest Imager performance.
Cleaning the Imager
Wipe the case with a damp cloth and a mild detergent. Do not use abrasives,
isopropyl alcohol, or solvents to clean the case or lens/window.
Battery Care
To get the best performance from the Imager’s Nickel-Metal Hydride (NiMH)
battery, use the guidelines that follow.
W Caution
To avoid damage to the Imager, do not leave the camera
exposed to a heat source or high-temperature
environments, such as an unattended vehicle in the sun.
• Do not store the Imager on the charger for more than 24 hours as
reduced battery life may result.
• Charge the Imager for a 2-hour minimum at least every six months to
maximize battery life. Without use, the battery will self-discharge in
approximately six months. Batteries stored for long periods may
require two to ten charging cycles before it reaches full capacity.
• Always operate the Imager within the temperature range specified in
the specifications labeled Temperature – Operating.
~ W Caution
Do not incinerate the Imager and/or battery. Go to Fluke’s
website for recycling information.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...