Loading ...
Loading ...
Loading ...
English
4
Emptying and cleaning
Removing the dust bowl and filters (Fig.
D, E)
WARNING: The filter is reusable and
should be cleaned regularly.
1. Press the bowl release button
2
and pull the dust bowl
3
straight off as shown in Fig. D.
2. While holding the dust bowl over a trash can, pull out
the filter
9
to empty the contents as shown in Fig. E.
3. To replace the dust bowl, push it back onto the handle
until it clicks firmly into place.
WARNING: Never use the appliance
without the filters. Optimum dust collection will only
be achieved with a clean filter.
Fig. D
2
3
Fig. E
3
9
Cleaning the dust bowl and filter
The dust bowl
3
and filter
9
can be washed in warm soapy
water.
1. Make sure the filter
9
and the dust bowl
3
are dry
before installing.
Accessories (Fig. L)
Your hand vac may be supplied with some of the following
accessory:
- A crevice tool
7
for confined spaces.
- A motorized brush
8
for easy debris pick up.
Fitting
1. Insert the appropriate accessory into the front of the
appliance as show in Figure F.
2. Make sure the accessory is fully pushed in.
Fig. F
3
7
Attaching Motorized Brush (Fig. G)
CAUTION: The unit needs to be switched
off when the motorized brushis attached ordetached.
nOTE: Do not use directly onpets.
1. Slide the dust bowl opening
3
into the opening of the
motorized motorized brush
8
.
2. Ensure that the plastic retaining tabs
11
engage with
the recesses
12
. An audible click will beheard.
Fig. G
12
11
8
3
12
Removing motorized brush (Fig. H)
CAUTION: The unit needs to be switched
off when the motorized brush is attached ordetached.
1. Pull the the plastic retaining tabs
11
outward away
from the recesses
12
.
2. Pull the dust bowl
3
from the motorized brush
8
.
Loading ...
Loading ...
Loading ...