Loading ...
Loading ...
Loading ...
Page 14
Installation
Instructions
20
508mm to 965mm
38
WINDOW REQUIREMENTS
Your air conditioner is designed to install in
standard double hung windows with opening
widths of 20 to 38 inches(508mm to 965mm).
NOTE:
If there is interference between the shaft
and the window, seal it with a sponge.
CAUTION
Do not, under any circumstances, cut or
remove the third (ground) prong from the
power cord.
Do not change the plug on the power cord
of the air conditioner.
Aluminum house
wiring may present special
problems- consult a qualified electircian.
When handling unit, be
careful to avoid cuts
from sharp metal edges and aluminum fins
on front and rear coils.
TOOLS YOU WILL NEED
TOOLS YOU MAY USE
Screwdriver
Level
Screwdriver
Pencil
Ruler or tape
measure
Scissors or knife
BEFORE YOU BEGIN
WINDOW-MOUNTED INSTRUCTIONS
Read these instructions completely and
carefully.
MPORTANT-Save these instructions for
local inspector
’
s
use.
IMPORTANT-Observe all governing codes
and ordianaces.
Note to Installer- Be sure to leave these
instructions with the Consumer.
Note to Consumer- Keep these instructions
for futrue reference.
Skill level- Installatio of this appliance
requires basic mechanical skills.
Completion time- Approximately 1 hour.
We recommend that two people install this
product.
Proper installation is the responsibility of
the installer.
Product failure due to improper installation
is not covered under the Warranty.
You MUST use all supplied parts and use
proper installation procedures as described
in these instructions when installing this air
conditioner.
Loading ...
Loading ...
Loading ...