Loading ...
Loading ...
Loading ...
bluestarcooking.com 21
Step 7 — Connect Electrical Supply
Observe all local and other codes regarding electrical
connections.
lmportant: Save these instructions for the local electrical
inspector’s use.
1. Remove the electrical box cover to expose the
terminal block. Route the wires through the strain
relief (not supplied) through the bottom of the
electrical enclosure. The terminal block allows for a
4-wire installation.
Four Wire Installation
1. If a four wire connection is used, remove and discard
the metal ground strap.
2. Connect green/ground to G.
3. Connect white/neutral to N.
4. Connect black to L1.
5. Connect red to L2.
lmportant: All electrical wiring should be free
and clear. Wires or cables should not be pinched
or otherwise obstructed.
7. Tighten the screws on the strain relief and attach the
electrical cover.
8. If the power cord (supplied with Canadian models) is
used, locate the electrical outlet and plug the range
into the outlet.
Installation Instructions (continued)
Three Wire Installation
1. Move the metal ground strap to positions N and G
as shown below.
2. Connect the white/neutral to G.
3. Connect black to L1.
4. Connect red to L2.
lmportant: All electrical wiring should be free
and clear. Wires or cables should not be pinched
or otherwise obstructed.
5. Tighten the screws on the strain relief and attach the
electrical cover.
7. If the power cord (supplied with Canadian models)
is used, locate the electrical outlet and plug the
range
This appliance must be grounded. Do not cut, remove,
or disregard the grounding wire in this appliance. If the
appliance is not grounded, severe shock hazards can
exist.
WARNING
Cet appareil doit être mis à la terre. Ne coupez pas, ne
retirez pas et ne négligez pas le l de mise à la terre de
cet appareil. Si l'appareil n'est pas mis à la terre, de
graves risques d'électrocution peuvent exister.
AVERTISSEMENT
N G L1 L2
Loading ...
Loading ...
Loading ...