Smeg HOBD382MB2 Induction with integrated hood Hob HOBD 80 cm

User manual EN - Page 10

For HOBD382MB2.

PDF File Manual, 17 pages, Read Online | Download pdf file

HOBD382MB2 photo
Loading ...
Loading ...
Loading ...
3. While holding down , start press-
ing the zone digits, proceeding anti-
clockwise.
1
2
4
3
The rear left digit indicates and a
number indicating the type of menu. The
front left digit indicates a number which
depends on the parameters indicated in
the selection.
Select the digit with and press “8” in
the power bar.
Select the front left digit and select the
correct setting.
See the following table for the specifica-
tions:
Value on the
power bar
KW Notes
0 7.4
Standard initial setting
1 4.5
2 3.5
3 2.8
Once the correct value has been
entered, confirm by touching and hold-
ing .
10. HOB FUNCTIONS
Child lock
This function prevents accidental use of the appliance. This cannot be used during a cooking oper-
ation
To enable: remove all cookware from the appliance, turn the appliance off. f there is no pan on the
hob, press and hold for 3 seconds one of the digits (not visible) next to point on the left side. Re-
lease and slowly swipe along the power bar from 0 to BOOST. All the digits that indicate .
The operations described must be completed within 10 seconds.
To disable: turn the appliance on and then press and hold any of the 5 digits for 3 seconds. Re-
lease and slowly swipe along the power bar from BOOST to 0. The 5 digit displays will lit up indicat-
ing and 0 power level.
The operations described must be completed within 10 seconds.
Lock
It is possible to lock the hob functions during use, e.g. to clean the hob. The function is enabled
even if the hob is switched off and on again.
If the electricity supply is cut, the function is disabled.
To enable: press and hold for 1 second.
To disable: press .
Boost function
Every cooking area can be set to an additional power level for a maximum of 5 minutes.
To enable: select one of the 4 cooking areas and select “P” on the power bar. The corresponding
digit indicates .
To disable: select one of the other possible values on the power bar.
26
Loading ...
Loading ...
Loading ...