Loading ...
Loading ...
STEP3
STEP2
MPWT50
STEP1
STEP4
5.25” (133 mm) 2-Way Marine/Powersports
Roll Cage/Waketower Speaker Pods
Installation instructions
It is strongly recommended that you work with an assistant to install these speakers.
To adjust the mounting angle, loosen the metal
base of the mounting band by unbolting the two
screws.
Make sure to put all components of the mounting
hardware in a safe location.
Metal base
48 x 30mm rubber pad
Aluminum band
Rubber strip
Mounting cage bar
(part of your marine
boat or powersports
vehicle)
Metal base
Twist the metal base to determine the
optimal mounting angle for the speaker on the
cage bar. Then secure the metal base
by tightening the two screws.
Place a supplied rubber (48 x 30 mm) pad on the
metal base of the mounting band to prevent
abrasion and secure clamping.
Place two supplied rubber strips around the cage bar
to prevent abrasion and secure clamping.
Then push two supplied aluminum bands over the
cage bar, and align the aluminum bands with the
metal base on the speakers.
Loading ...