Loading ...
Loading ...
Loading ...
52 TROUBLESHOOTING
Dryer
FAQs: Frequently Asked Questions
Error Messages
Q: When I press a button, why does my dryer beep and then nothing happens?
A: The Control Lock feature is turned on. To turn off Control Lock, turn the dryer on, then press and
hold the button that has Control Lock on or under it for 3 seconds.
Q: Why does my dryer take so long to dry clothes?
A: Proper airflow is critical to the efficient operation of clothes dryers. A lint filter which is full of lint or
clogged with fabric softener sheet residue can reduce the airflow to the point that the time required
to dry clothing will be greatly increased.
Q: Why does my dryer start by itself every few minutes?
A: This is how the Wrinkle Care feature works. The dryer runs briefly every few minutes for up to 3
hours after the cycle finishes. This feature is designed to help prevent wrinkles from setting in when
the dryer is not unloaded immediately after the cycle is finished.
Q: Why does my dryer show 3 minutes when I select the Steam Freshcycle?
A: When the Steam Fresh™ cycle is selected, the dryer displays the recommended number of garments
for the cycle, not the estimated cycle time, until the cycle is started. Use the Time Dry button to adjust
the load size setting for the number of garments you desire.
Problem Possible Cause & Solution
tE1 through tE7
TEMPERATURE
SENSOR ERROR
Temperature sensor failure.
Turn off the appliance and call for service.
Ps
POWER ERROR
Power cord is connected incorrectly.
Check the connection of the power cord to the terminal block.
d7s, d8O, dGO, dGs
DUCT BLOCK ERROR
The duct work is about 75% - 95% blocked. (The error code is displayed for 2 hours only.)
Do not use the appliance until the exhaust system has been cleaned and/or repaired.
Using the appliance with a severely restricted exhaust is dangerous and could result in a
fire or other property damage.
Check the outside dryer vent while the appliance is operating to make sure there is strong
airflow. If the exhaust system is extremly long, have it repaired or rerouted.
House exhaust system blocked.
Keep the area around the dryer clean and free of clutter. Check vent hood for damage or
lint clogging. Make sure the area around the vent hood is clear.
[L
CONTROL LOCK
FUNCTION
The Control Lock function is on to prevent anyone from changing cycles or operating
the dryer.
Turn off the Control Lock function in the control panel. See Control Lock under Options
and Extra Functions.
Loading ...
Loading ...
Loading ...