www.remington-products.com.au
www.remington.co.nz
X9 Limitless X Rotary Shaver
XR1795AU
f
e
l
k
g
i
mn
o
j
r
A
B
C
D
E
4
IMPORTANT SAFEGUARDS
When using electrical appliances, basic precautions should always be
observed, including the following.
READ ALL INSTRUCTIONS BEFORE USING
DANGER: As with most electrical appliances, electrical parts are electrically
live even when the switch is off.
For additional protection, the installation of a residual current device (rcd)
having a rated residual operating current not exceeding 30 mA is advisable
in the electrical circuit supplying the bathroom. Ask your installer for
advice.
WARNING: TO REDUCE THE RISK OF BURNS, ELECTROCUTION AND FIRE OR
INJURY TO PERSONS
• Before using your product, we recommend that you carefully read the user
manual, which indicates the term of this warranty and the proper use you
should give the product.
• The appliance should never be left unattended when plugged into a power
outlet, except when charging the appliance.
• This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children without
supervision.
• Never operate this appliance if it has a damaged cord or plug, if it is not
working correctly, if it has been dropped or damaged, or dropped into
water. If the supply cord or plug of the appliance is damaged it must be
replaced by the manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard. It cannot be repaired.
• Keep the cord away from heated surfaces.
• Charge, use and store the product at a temperature between 0°C and 32°C.
• Do not use outdoors or where aerosol (spray) products are being used, or
where oxygen is being administered.
• Do not use this appliance with damaged or broken tracks, foils or cutters, as
injury may occur.
5
• For use on facial hair only. Not intended for shaving the hair on your head.
• Do not plug or unplug the appliance with wet hands.
• For household use only.
• Do not place or store the appliance or charging cable where it can fall or be
knocked into a sink or bath.
• Do not place in or drop into water or any other liquid for extended periods
of time.
• If an appliance falls into water, “unplug it” immediately. Do not reach into
the water.
• Unplug the charging cable immediately after fully charging.
• WARNING: Detach the hand-held part from the supply cord before using or
cleaning it in water.
• Use this appliance only for its intended use as described in this manual.
• Do not use attachments not recommended by Remington.
• Never drop or insert any object into any opening of this appliance.
• Always store the cable and shaver in a moisture-free location.
• Do not use on people who are asleep.
• Do not wrap the cord around the appliance.
• Remington strongly recommends that an approved Safety Switch (Residual
current device) be installed to protect all bathroom power outlets. Ask an
electrical contractor for advice.
E
Suitable for use in bath and shower.
SAVE THESE INSTRUCTIONS
PARTS
1. On/off switch
2. Pivoting head and cutter assembly
3. Individual flexing heads
4. Hairpocket
5. Turbo button
6. Shave - Learn LEDs
7. Power connector
8. Adjustable stubble comb (1-5mm)
9. Detail trimmer
10. Comb adjustment dial
11. Head release button
Not shown
• USB charging cable
• Cleaning brush
• Head guard
• Travel case
6
GETTING STARTED
CHARGING
• It is recommended to fully charge your appliance before using it for the first time.
• Ensure the product is switched off.
• Connect the product to the USB cable and then to the USB end of the cable to a
powered USB port.
SHAVE-LEARN LEDS
Number of shaves remaining
During use, your shaver continuously analyses the average time it takes you to shave.
The LEDs are all lit when the battery has enough charge for 5 shaves or more. When it
senses that there are only 5 shaves remaining before the battery needs to be recharged, the
LEDs will show each remaining shave left when you turn on your shaver. All 5 LEDs means
you have 5 or more shaves left, 4 LEDs, 4 shaves, etc. The LEDs will fade out after 5 seconds.
Charging
During charging, the 5 LEDs act as a fuel gauge with each LED representing 20% of the
battery charged. When your shaver is fully charged, all of the LEDs will switch off.
• Run time from fully charged is up to 60 mins.
• Charge time from empty is 90 minutes.
• Do not recharge your product after each use as this will shorten the life of the battery.
• Note: To preserve the life of your batteries, let them run out every 6 months then fully
charge.
QUICK CHARGE FEATURE
• Your shaver has a 5 minute quick charge feature that will provide enough charge for 1
shave (3 minutes).
INSTRUCTIONS FOR USE
SHAVING
1. Switch the shaver on by pressing the on/off button.
2. Stretch the skin with your free hand so the hairs stand upright.
3. Only apply light pressure on the shaving head while shaving (pressing too hard can
cause skin irritation).
4. Use short, circular strokes.
SHAVING WITH SHAVING GEL
• Follow the same instructions as dry shaving if using shaving gel.
• CAUTION After use with shaving gel, please rinse the head and cutters under warm
water to clean away any excess gel and debris.
7
TURBO FEATURE
Use the Turbo feature to shave thick stubble. Press the turbo button to operate the shaver in
Turbo mode. The turbo button will light up white. Press the turbo button again to deactivate
turbo mode.
DETAIL TRIMMER AND COMB ATTACHMENT
To fit the detail trimmer and comb attachment:
1. Switch off your shaver.
2. Grasp the head and cutter assembly and pull it away from the body of your shaver
(Fig A).
3. If using, clip the adjustable comb over the trimming attachment (Fig. B)
4. Clip the detail trimmer onto the body of your shaver (Fig. C).
TRAVEL LOCK
The travel lock feature prevents the shaver from turning on and discharging accidentally
while stored away or travelling. To lock, press and hold the turbo button for 3 seconds until
the Licon comes on. To unlock, press and hold the turbo button for 3 seconds until the
Licon switches off.
TIPS FOR BEST RESULTS
• Always hold the shaver at right angles to the skin so that all three heads are touching
the skin with equal pressure.
• Use moderate to slow stroking movements. The use of short circular motions in
stubborn areas may obtain a closer shave, especially along the neck and chin line.
• DO NOT press hard against the skin in order to avoid skin irritation.
CARE FOR YOUR SHAVER
Care for your shaver to ensure a long lasting performance. We recommend you clean your
shaver after each use.
• Ensure your shaver is switched off before cleaning.
1. Open the shaver head by pressing the release button (Fig. C).
2. The head assembly will open (Fig. D).
3. Rinse under a tap to wash away hair trimmings.
4. Carefully brush away any hairs from the cutters.
5. Snap the head assembly closed.
Note: The individual cutters are designed to be permanently retained in the shave head and
flushed out with water. Do not remove the individual cutters for cleaning.
DETAIL TRIMMER
Lubricate the teeth of the detail trimmer every six months with a drop of sewing machine oil.
8
BATTERY DISPOSAL
Note: The battery is not intended to be removed or replaced under normal use. The only
time the battery should be removed or the unit opened or disassembled, is at the end of the
product’s useful life before it is discarded.
• The appliance contains a lithium nickel manganese cobalt oxide battery. Once the
shaver has reached the end of its life, to ensure proper disposal of the product, please
take the appliance to a recycling centre, where the internal rechargeable battery
should be removed by a professional and recycled separately.
• For more information about recycling of electrical and battery operated appliances,
please contact your local council office or your household waste disposal service.
Caution: Do not put in the fire or mutilate your batteries when disposing as they may burst
and release toxic materials. Do not short circuit as it may cause burns.
We suggest you use local waste management centres to recycle this product at end of life.
DISPOSAL/RECYCLING
Legislation in some localities mandates that e-waste (anything with a plug, battery or cord)
is disposed of through controlled recycling facilities and must not be disposed of in general
household waste. For more information about recycling of electrical and battery operated
appliances, please contact your local council or your local household waste disposal service.
Spectrum Brands Australia Pty Ltd and Spectrum Brands New Zealand Limited
WARRANTY AGAINST DEFECTS
In this warranty:
Australian Consumer Law means the Australian consumer law set out in Schedule 2 to the
Competition and Consumer Act 2010;
CGA means the New Zealand Consumer Guarantees Act 1993;
Goods means the product or equipment which was accompanied by this warranty and
purchased in Australia or New Zealand, as the case may be;
Manufacturer, We or us means:
1. for Goods purchased in Australia, Spectrum Brands Australia Pty Ltd
ACN, 007 070 573; or
2. for Goods purchased in New Zealand, Spectrum Brands New Zealand Limited, as the
case may be, contact details as set out at the end of this warranty;
Supplier means the authorised distributor or retailer of the Goods that sold you the Goods
in Australia or in New Zealand; and
9
You means you, the original end-user purchaser of the Goods.
1. Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law, or the CGA. You are entitled to a replacement or refund for a major
failure and compensation for any other reasonably foreseeable loss or damage. You are
also entitled to have the goods repaired or replaced if the goods fail to be of acceptable
quality and the failure does not amount to a major failure.
2. The benefits provided by this Warranty are in addition to all other rights and remedies
in respect of the Goods which the consumer has under either the Australian Consumer
Law or the CGA. The original purchaser of the Goods is provided with the following
Warranty subject to the Warranty Conditions:
3. We warrant the Goods for all parts defective in workmanship or materials for the period
of three (3) years from the date of purchase (Warranty Period). If the Goods prove
defective within the Warranty Period by reason of improper workmanship or material,
we may, at our own discretion, repair or replace the Goods without charge.
Warranty Conditions
4. The Goods must be used in accordance with the manufacturer’s instructions. This
Warranty does not apply should the defect in or failure of the Goods be attributable to
misuse, abuse, accident or non-observance of manufacturer’s instructions on the part of
the user. As far as the law permits, the manufacturer does not accept liability for any
direct or consequential loss, damage or other expense caused by or arising out of any
failure to use the Goods in accordance with the manufacturer’s instructions.
5. Consumable parts (such as shaver heads, cutters and foils) of the Goods are included
under this Warranty only where there is a defect in workmanship or materials used.
6. The warranty granted under clause 3 is limited to repair or replacement only.
7. Any parts of the Goods replaced during repairs or any product replaced remain the
property of the manufacturer. In the event of the Goods being replaced during the
Warranty Period, the warranty on the replacement Goods will expire on the same date
as for the Warranty Period on the original Goods which are replaced.
8. In order to claim under the warranty granted under clause 3 you must:
(a) Retain this warranty with your receipt/proof of purchase; and
(b) Return the Goods to us at the relevant address below or to the Supplier by prepaid
freight within the Warranty Period accompanied with (i) the legible and unmodified
original proof of purchase, which clearly indicates the name and address of the Supplier,
the date and place of purchase, the product name or other product serial number and
(ii) this warranty.
10
9. This warranty is immediately void if:
(a) Any serial number or appliance plate is removed or defaced;
(b) The Goods have been serviced or otherwise repaired by a person not authorised to
do so by us or where non approved replaced parts are used.
10. The Goods are designed for domestic use only. A limited 90-day Warranty applies to any
industrial or commercial use of the Goods. The Goods must be connected to the
electrical voltage requirements as specified in the ratings label located on the Goods.
11. This warranty does not cover the cost of claiming under the warranty or transport of the
Goods to and from the Supplier or us.
12. This warranty is only valid and enforceable in Australia against Spectrum Brands
Australia Pty Ltd and in New Zealand against Spectrum Brands New Zealand Limited.
Contact us or the Supplier for further details.
Spectrum Brands Australia Pty Ltd
Locked Bag 3004
Braeside, VIC 3195
AUSTRALIA
Customer service in Australia: 1800 623 118
E-mail: consumer.enquiry@remington-products.com.au
Website: www.remington-products.com.au
Spectrum Brands New Zealand Limited
PO Box 9817
Newmarket, Auckland 1149
NEW ZEALAND
Customer service in New Zealand: 0800 736 776
E-mail: info@remington.co.nz
Website: www.remington.co.nz
MONEY BACK OFFER – AUSTRALIA / NEW ZEALAND ONLY
If within 60 days you are not fully satisfied with your Remington
®
shaver, just return the
shaver with this completed coupon and a copy of your Australian/New Zealand
purchase receipt to Remington
®
. In return, we will send you a cheque for the full
purchase price of the shaver. Please allow 6-8 weeks for your cheque to arrive.
Name:
Address:
City:
State: Postcode: DOB:
Contact No: Area Code: Ph:
Product Model number:
Is this the first Remington shaver you have owned/purchased? Yes No
Why are you returning this shaver?
Skin Irritation Shave is not close enough Prefer a rotary/foil shaver
Other:
!
Type No: R35B T22-7003185
