Loading ...
Loading ...
Loading ...
Note
For detailed informaon about mulcast, refer to Mulcast .
HTTP
HTTP is suitable for the situaon that the third-party needs to get the stream from the
device.
Play Performance
Shortest Delay
The device takes the real-me video image as the priority over the video uency.
Balanced
The device ensures both the real-me video image and the uency.
Fluent
The device takes the video uency as the priority over teal-me. In poor network
environment, the device cannot ensures video uency even the uency is enabled.
Custom
You can set the frame rate manually. In poor network environment, you can reduce the
frame rate to get a uent live view. But the rule informaon may cannot display.
3.
Click OK.
2.3.3 Set Smooth Streaming
It is a funcon to tackle the latency and network congeson caused by unstable network condion,
and keep the live view stream on the web browser or the client soware smooth.
Before You Start
Add the device to your client soware and select NPQ protocol in client soware before
conguring the smooth streaming funcon.
Be sure that the Bitrate Type is selected as Constant and the SVC is selected as OFF before
enabling the funcon. Go to Conguraon → Video/Audio → Video to set the parameters.
Steps
1.
Go to the sengs page: Conguraon → Network → Advanced Sengs → Smooth Streaming .
2.
Check Enable Smooth Streaming.
3.
Select the mode for smooth streaming.
Auto The resoluon and bitrate are adjusted automacally and resoluon takes the
priority. The upper limits of these two parameters will not exceed the values
you set on Video page. Go to Conguraon → Video/Audio → Video , set the
Resoluon and Max. Bitrate before you enable smooth streaming funcon. In
this mode, the frame rate will be adjusted to the maximum value
automacally.
Network Camera User Manual
16
Loading ...
Loading ...
Loading ...