Loading ...
Loading ...
Loading ...
7
System Setup
1.Connect the included AC power supply to the rear of the receiver and turn on the receiver.
2.Standard Display
The standard display shows the preselected group and channel.
Group
Channel
Push the SET button and hold for 1 second, the GROUP icon will blink. Push the up
and down buttons to set the desired group (01-10), Press SET again to confirm.
The display will return to the standard operating setting after a short period of non-
activity automatically.
NOTE: Each group 01-10 consists of 10 channels, each corresponding to a specific
frequency. Some frequency bands, for specific regions, will not have 10 channels
per group. (Groups vary by region.)
After setting the group, press SET again, the CHANNEL will blink. Push the up and
down buttons to set the desired channel (01-10 region dependent) Press SET again
to confirm.
The display will return to the standard operating appearance after a short period of
non-activity automatically.
Loading ...
Loading ...
Loading ...