Loading ...
Loading ...
Loading ...
the rst me, click Add Topology to generate the device's
network topology.
●
If no topology is displayed when you access the topology
interface for the
rst me, click to refresh the topology view
or get topology again.
Related Operaons
Operaon Descripon
Double-click a device to
view the device details.
You can view the basic device informaon
such as the device type, model, and IP
address as well as the device usage, panel
status, and port informaon.
Double-click a link to view
the link details.
You can view the transmission rates of the
link and the informaon about devices at
both ends of the link.
Right-click a device, and
select Device Status,
Event Handling, Remote
Conguraon, Edit Name,
or Set as Root Node from
the shortcut menu.
Device Status: You can jump to the Device
Status interface. For details, see Device
Status.
Event Handling: You can view the
informaon about alarm events such as the
event me, event source, and event details,
or clear events.
Remote Conguraon: You can jump to the
web page of the device for remote
conguraon. For detailed operaons, see
Smart Managed Switch Web User Manual.
Edit Name: You can customize the device
name.
Set as Root Node: You can set the device as
the root node on the topology view.
Click to export the
topology view.
You can select the saving path and format,
and export the topology view.
Note
The default format is PDF.
Click to show the
transmission path.
You can select a network camera (IPC) and
the current device to show the path of signal
transmission between them.
4.2 Topology Sengs
Steps
1.
Click in the lower le corner to edit topology sengs.
Figure 4-2 Topology Sengs
Set Display Level
6
Loading ...