Loading ...
Loading ...
Loading ...
en Installation instructions
20
11.
Remove the adhesive strips from the front panel.
12.
Open the appliance carefully and check whether the
tilt protection is working.
Installing the appliance
WARNING‒Risk of injury!
When the door is opened, the appliance may tip over.
▶ In the case of installation without an intermediate
floor, weigh down the appliance with a suitable
weight before opening.
1.
Insert the power cable fully into the appliance.
2.
Push the appliance all the way into the fitted unit.
‒ Do not pinch the power cable.
3.
Centre the appliance.
4.
Remove the adhesive strip from the front panel.
5.
Open the appliance.
6.
Screw the appliance to the fitted unit.
7.
Insert the power cord into a protective contact
socket.
The power cord must not touch the back or base of
the appliance after installation.
Fitting the panels
1.
Push the eccentric forwards from the fastening ele-
ment
.
2.
Push the eccentric backwards from the fastening
element .
a The eccentric stops.
3.
Push the eccentric backwards into the fastening ele-
ment .
4.
Hook the fastening elements into the openings at
the bottom and push down until the fastening
elements engage.
Insert the red fastening elements into the upper
opening.
Insert the green fastening elements into the lower
opening.
5.
Remove the protective film from the panels.
6.
Fit the panels on both sides of the appliance.
7.
Check the clearances of the panels.
Adjusting the panels
WARNING‒Risk of injury!
Parts that are accessible during installation may have
sharp edges and may lead to cutting injuries.
▶ Wear protective gloves.
ATTENTION!
Unsuitable tools may damage the surface of the appli-
ance.
▶ Only use plastic tools.
▶ Do not use pointed or sharp tools.
Loading ...
Loading ...
Loading ...