Loading ...
Loading ...
Loading ...
LED SCREEN
1. Symbol 00:00 ashes for 1 minute to dim into standby mode.
2. Press the 'On' key. 00:00 slowly ashes 5 times. When there's no operation,
the machine starts to work. The working time options are 20 minutes,
40 minutes, and 60 minutes, cycling through in that order.
Press the 'Time' key to add 20 minutes each time.
The corresponding time next to the dot will ash 5 times.
If there's no further action, the towel warmer will start automatically, and the
small circle indicator will remain lit. The display shows the countdown time.
The background light of the time button is illuminated.
3. Press the 'Switch' key. 00:00 slowly ashes, indicating appointment time.
Press the right 'DELAY' key once to delay for 30 minutes; the 'DELAY' key
background ashes. Press twice to delay for 60 minutes. The display will show
the appointment time ashing. The 00:00 symbol will continue to slowly ash,
allowing you to set the working time after the start.
The machine defaults to 20 minutes. Press the second time for 40 minutes and
the third time for 0 minutes. Each press increases by 20 minutes (same as in
step 2). When the set time is over, the display shows the countdown of the
working appointment, and the appointment light stays on.
4. The 'Switch' symbol light is red, indicating a high internal temperature during
operation. This serves as a reminder not to touch the internal metal parts due
to the risk of burns.
www.SereneLifeHome.com 7
Loading ...
Loading ...
Loading ...