Loading ...
Loading ...
Before you begin
Read these instructions completely and carefully.
IMPORTANT - Save these instructions for the local inspector’s use.
IMPORTANT - Observe all governing codes and ordinances.
IMPORTANT - Remove all packaging material and literature from the oven before connecting the gas
and electrical supply to the range.
IMPORTANT - To avoid damage to your cabinets, check with your builder or cabinet supplier to make
sure that the materials used will not discolor, delaminate or sustain other damage. This oven has been
designed in accordance with the requirements of UL and OSA International and complies with
temperatures of 194°F (90°C).
Important to the Installer - Be sure to leave these instructions with the consumer.
Important to the customer - Keep these instructions for reference.
Propper installation is the responsibillity of the installer.
In the commonwealth of Massachusetts
Appliance must be installed by a qualified plumber or gas fitter. The shut-off valve must be with a
T-handle type.
Fire or explosion hazard
WARNING!
If the information in this manual is not followed exactly, a fire or explosion may result
causing property damage, personal injury or death. Installation must be performed by a
qualified installer. Installation of this range must conform with local codes, or in the
absence of local codes, with the National Fuel Gas Code, ANSI Z223.1/ NFPA.54, latest
edition. In Canada, installation must conform with the current Natural Gas Installation
Code, CAN/CGA-B149.1 or the current Propane Installation Code, CAN/CGA-B149.2, and
with local codes where applicable. This range has been design-certified by UL
International according to ANSI Z21.1, latest edition and Canadian Gas Association
according to CAN/CGA-1.1.latest edition. When installing a gas appliance the use of old
flexible connectors can cause gas leaks and personal injury. Always use a NEWflexible
connector! Leak testing of the appliance shall be conducted according to the
manufacturer instructions. The range must be electrically grounded in accordance with
local codes or, in the absence of local codes, in accordance with the National Electrical
Code (ANSI/NFPA 70, latest edition). In Canada, electrical grounding must be in
accordance with the current CSA C22.1 Canadian Electrical Code Part 1 and/or local
codes. See Electrical Connections in this section. Do not install this product with an air
curtain hood or other range hood that operates by blowing air down on the cooktop.
This airflow may interfere with operation of the gas burners resulting in fire or explosion
hazard.
EN 3
Loading ...
Loading ...
Loading ...