Loading ...
Loading ...
Loading ...
USING THE WATER BOILER
Using the Water Boiler for the First Time
1. Wash and rinse inner tank with water.
2. Fill water up to “Full” line indicator.
3. Boil once and discard water by pumping it out.
OPENING TOP LID
Place the water boiler on a flat surface. Open top
lid and fill with water to your
desired capacity.
Always fill the water between the minimum
and maximum water level line indicator.
CLOSING TOP LID
Carefully close lid by pressing down until a click
sound is heard.
Do not close the upper lid forcefully. (Hot
water may gush out and cause scalds.)
1. Insert the receptacle fully into the boiler’s
power inlet then plug into the wall socket.
2. Do not switch ON. When the container is empty.
When rotating the body, be careful that the
power cord does not get in the way.
BOIL KEEP WARM
BOIL BOIL
KEEP WARM KEEP WARM
1. “Boil” light is on during boiling process.
2. It will switch to “keep warm” automatically
after the water is boiled.
Do not open the upper lid during boiling
process.
Do not touch the steam coming out of the
steam vent.
Do not cover the steam vent with any
flammable items.
Do not dispense hot water while the water is
boiling.
POURING HOT WATER
1. The hot water might not dispense smoothly
right after boiling.
2. Press on the ”AUTO DISPENSE” button to
dispense hot water.
CAUTION: Always keep the lid away from you
as there is hot steam trapped under the lid.
Do not press the dispensing button when the
inner water reservoir is empty. (Doing so can
cause damage.)
You cannot dispense hot water if the water
boiler is unplugged.
5
ovente.com
Loading ...
Loading ...
Loading ...