Loading ...
Loading ...
Loading ...
27
Smoke outlet selection
You can use the hood in two ways, as described below.
A: Extractor mode B: Re-circulation mode
A B
.For this, the lever on the motor fan unit must be set to the corresponding position.
Fit the connection for exhaust mode and the cap for re-circulation mode over the air outlet. Please also read
the instructions provided in the "Assembly" section.
Extractor mode
WARNING:
Exhausted air cannot be evacuated through an exhaust pipe used for gas waste from
appliances fueled by gas or other appliances fueled by other fuels.
When exhaust air is vented, relevant local authority regulations must be fulfilled.
The extractor hood has an air vent at the top to extract cooking odors outside.
• Normally, extracted air is evacuated vertically. If there is a suitable recess above your
kitchen, the exhaust air is evacuated through the wall modules and through the base of
this recess to the outside.
• If your kitchen has a duct under the wall modules, the exhaust duct can be installed so
that the exhaust air can be discharged horizontally through the wall.
Re-circulation mode
• If it does not have a direct exhaust opening to the outside, the hood can also be operated in re-
circulation mode (i.e. without an exhaust opening to the outside, the filtered air is returned to the room). In
this case, an activated carbon filter must be used as described in "Installing the activated carbon filter for
circulation mode".
• Activated carbon filter is included for the models SELATI640X/B/W
Assembly
WARNING:
When assembling or inserting the extractor filter and charcoal filter, the appliance must not be
connected to the power supply.
If mounting accessories are not used, there is a risk of electrocution
Loading ...
Loading ...
Loading ...