Loading ...
Loading ...
Loading ...
-18-
TROUBLESHOOTING
Should you have any problem(s) with your vacuum cleaner, review the table
below for solutions to minor performance issues.
WARNING
Disconnect electrical supply before performing maintenance to the vacuum
cleaner. Failure to do so could result in electrical shock or personal injury.
PROBLEM POSSIBLE CAUSE SOLUTION
Vacuum will not power on.
The plug is not plugged to
the wall outlet.
Be sure power cord plug is
fully plugged into outlet.
The On/Off switch is not
pressed to the ‘I’ ON
position.
Press the on/off switch to
the ‘I’ ON position.
The vacuum body is
overheated.
Unplug the power cord
and let the vacuum cool
down for 50 minutes.
The motor is damaged.
Call (866) 384-8432 for
assistance.
The job of dirt pick-up is
poor or suction power is
weak.
Dust cup is full. Empty dust cup.
Filter needs cleaning.
Follow lter cleaning
instructions on page 15.
Filter needs to be
replaced.
To purchase online at
www.vacmaster.com or
call (866) 384-8432.
There is a clog in the
vacuum.
Check the nozzle and dust
cup for clogs and remove
accordingly.
Dust cup is not installed
well.
Check dust cup for correct
installation and ensure it is
snapped rmly in place.
The dust release button is
not locked into place.
Check and ensure it is
locked rmly into place.
Loading ...
Loading ...
Loading ...