DA-JB2200 INSTALLATION MANUAL
This manual is intended for users of the DA-JB2200 ceiling mounting bracket. It
includes instructions for mounting the DA-JB2200 ceiling mounting bracket to a
ceiling.
• This bracket is intended to be used with a specic model of camera.
Do not use it with other models of cameras except for those
approved by the dealer or distributor.
• This installation should be performed by a qualied service
personnel in conformance to all local codes.
• You may need to reinforce the ceiling. If the ceiling is not strong
enough to support the camera, the camera may fall.
• Do not use this product for other purposes.
Mounting
Mount the bracket to the ceiling as follows:
1
Insert cables from external devices, network and
power adapter to the sponge and bracket. If you
have a PT 1/2 inch pipe, remove the PT 1/2 inch cap
and make the cables go through the pipe. Assemble
the removed PT 1/2 inch cap to the bracket's ceiling
hole. Ask your dealer or distributor for details about
connecting a pipe.
2
Mount bracket to the ceiling by using the provided
anchors, rubbers, and screws.
Make sure that a rubber is attached
between bracket and a screw.
Bracket
Rubber
PT 1/2 inch CAP
Ceiling Hole
Connect your camera to the bracket as follows:
3
Screw the camera body onto
bracket.
4
Screw the camera dome
cover onto the camera body.
5
Turn on power.
Bracket
Camera
body
Safety wire
Camera
body
Dome
cover
Safety
wire
Loading ...
