Loading ...
Loading ...
Loading ...
Page 20
8. Maintenance
Troubleshooting
If the product does not work:
Before you contact the technical service department, make sure that the product is plugged in,
the electric fuse (on selected models) is in correctly and electric wiring is connected. (Fuses can be
purchased from your local electrical dealer or hardware store). Weak air suction may be caused by
EDFNGUDIWÀQVUHPDLQLQJFORVHG'RQRWWDNHDQ\DFWLRQWKDWZLOOGDPDJHWKHSURGXFW
7HFKQLFDO6SHFLÀFDWLRQV
Model DS3326-9S
Feeding Voltage 220-240V 50Hz
Check electric connection. Voltage of the
electric network should be between 220 -
240V, rangehood should be connected to
grounded plug and turned on.
Check motor switch. Please ensure that
there is power to the rangehood and the
rangehood is switched on.
Check lamp switch. Lamp switch should be
at on position.
&KHFNPHWDOÀOWHU0HWDOÀOWHUVKRXOGEH
ZDVKHGUHJXODUO\VHHÀOWHUFOHDQLQJ
&KHFNODPSV/DPSVVKRXOGEHÀUP
Check outlet. Outlet should be open.
Check lamps and fuse. Make sure they are
not broken or faulty.
Please make sure there is no obstruction
LQGXFWLQJRUEDFNGUDIWÀQV
Check the outlet, make sure it is not
blocked and you have the correct
diameter ducting installed.
Check Isodrive installation manual, make
VXUHWKHÁH[LGXFWLQJLVLQVWDOOHGFRUUHFWO\
eg. Length of ducting used, keep the
ducting taut.
Rangehood does not work XX
Light does not work XXXX
Rangehood air suction is weak XX XX
Rangehood does not direct air out
(through chimney)
XX
Loud noise from the rangehood XX
Loading ...
Loading ...
Loading ...