Loading ...
Loading ...
Loading ...
- 5 -
Figure 1
Figure 2
2.Drainage: The drain is at the bottom of the back of the machine, as shown in Figure 3.
Unscrew the drain nut and tilt the fuselage slightly to empty the tank completely. The
machine must drain regularly and keep the water clean, if it is not used for a long time,
please drain the water to prevent it from deteriorating inside the box.
Figure 3
3.Automatic water injection: The machine is equipped with an external water pipe port
(Figure 4), which connects a water pipe (with an inner diameter of 13mm) of suitable size
with the water pipe port. The float mechanism inside the machine will automatically open or
close water injection according to the water level. The allowable inlet pressure of this
external water pipe is 0.01~0.60MPa.
Figure 4
Ⅳ
.Function Description
1. Power supply: Plug in the power supply, and the cold fan is in standby mode. Press the
power key to turn on the cold fan.
2. Wind speed: select the wind speed (low medium high).
3. Wind: natural wind and sleep wind cycle selection.
Loading ...
Loading ...
Loading ...