FROST
VAULT
™
50-QT COOLER
GET TO KNOW
YOUR COOLER
Easy-to-carry design.
STURDY HANDLES
Easy-close, one-handed
latch seals lid securely.
LOCKABLE LID & DRAWER
Easy access to your essentials,
keeping them cold, dry, and separate
from the main cooler full of ice.
NINJA FROSTVAULT
™
DRY ZONE
Mess-free, easy drainage.
DRAIN PLUG
Inner-wall insulation delivers
longer-lasting ice retention.
THICK INSULATION
STANDARD
WIRE BASKET
THEIR
EXCLUSIVE
NINJA
FROSTVAULT
DRY ZONE
™
VS
DRIER.
SAFER.
COLDER.
EASIER.
Ninja FrostVault
™
Technology delivers
food-safe fridge temps for days under 40
˚
F.
Keeps your food cold, dry, and separate
from the main cooler full of ice vs. traditional
coolers with wire baskets that can quickly
reach unsafe food temps (over 60
˚
F).
For best results, load the drawer with
pre-chilled items.
PRE-CHILL
GET THE MOST OUT
OF YOUR NINJA
FROSTVAULT
™
ZONE
For best results, load the drawer with
pre-chilled items.
PRE-CHILL
Lay ice on the bottom of the main cooler to
keep drawer contents cold. DO NOT add ice
to the drawer. Fill the drawer completely with
food or drinks. DO NOT overfill.
FILL IT UP
Keep the drawer closed when not in use,
and limit opening and closing to maintain
optimal temperature.
KEEP CLOSED
THE RIGHT RATIOS
For the best FrostVault™ experience, we
recommend filling your cooler’s main
compartment with 33 cans and a minimum
of 25 lbs of ice. DO NOT use dry ice. Ice
does not need to be placed in the drawer.
PRE-CHILL THE COOLER
Before using, leave the cooler open in a cool
space for a few hours or overnight. For even
better results, fill with ice to lower the inside
temperature. Drain when ready to use, then
add fresh ice and pre-chilled contents.
MAXIMIZE
ICE RETENTION
PACK EFFICIENTLY & KEEP CLOSED
Fill the cooler completely with ice, food, and
drinks, then use a towel to fill empty space if
necessary. To retain cold temperatures and
ice, keep the cooler closed. Keep shaded or
cover with a tarp or blanket for best results.
Ensure your cooler is on an even, level
surface. DO NOT stand on the cooler.
After use, leave the lid and drawer open until
the cooler is completely dry to prevent mold
or odors. Close the lid and drawer then store
the cooler in a cool, dark, and dry place.
SECURE
YOUR COOLER
COOLER STORAGE
AND PLACEMENT
Wrap two
straps, one
around each
handle.
Weave one
tie-down
strap through
each handle.
OR
Remember, always ensure your cooler is
completely dry before closing and storing
to prevent mold and mildew growth.
Pull Ninja FrostVault
™
Dry Zone drawer out
completely, lift at an angle, and remove like you
would a dresser drawer. Rinse or wipe away any
sand or dirt between uses. Clean with warm,
soapy water. Rinse thoroughly and let air-dry.
To reinsert, put back in at an angle and close.
DRAWER CLEANING
FIRST CLEANING
Before first use, clean the cooler with
warm, soapy water. Rinse thoroughly
and let air-dry.
ROUTINE CLEANING
After each use, rinse your cooler with warm,
soapy water. Scrub the interior with a soft
brush or cloth to remove any residue or
odors. Rinse thoroughly and let air-dry.
DEEP CLEANING
Apply a paste of baking soda and water to
stubborn stains or odors and scrub gently.
Rinse thoroughly and let air-dry.
CLEANING YOUR
COOLER
FB150Series_QSG_MP_Z1_Mv3
© 2023 SharkNinja Operating LLC.
NINJA FROSTVAULT is a trademark of
SharkNinja Operating LLC.
This product may be covered by one or more U.S. patents.
See sharkninja.com/patents for more information.
We guarantee every Ninja FrostVault™
Cooler with a 5-year limited warranty
against manufacturer defects.
For details visit ninjakitchen.com/support.
WARRANTY
5 YEAR
UPC
