Loading ...
Loading ...
Loading ...
Installation instructions /
• For some air conditioners exported to Australia, connect the DRED device
to
the DRED terminal on the
air conditioner.
DRED
termlnal
Air
conditioner
~
---Fl
1. Install Drain Port and Drain Hose (for heat-pump model only)
The condensate drains from the outdoor unit when the unit operates
in heating mode. In order not to disturb your neighbor and protect
the environment, install a drain port and a drain hose to direct the
condensate water. Just install the drain port and rubber washer to
the chassis
of
the outdoor unit, then connect a drain hose to the
port as the right figure demonstrates.
2. Install and Fix Outdoor Unit
Fix with bolts and nuts tightly on a flat and strong floor.
Rubber pad (optional)
Place under
the
leg pedestal
/~Washer
Drain
port
\ _
..
Drainhoaa
(praparad by uoer)
If
installed on the wall
or
roof, make sure
to
fix
the supporter well to prevent
it
from shaking due
to
serious vibration
or
strong wind.
3.
Outdoor Unit Piping Connection
• Remove the valve caps from the 2-way and 3-way valve.
• Connect the pipes
to
the 2-way and 3-way valves separately according
to
the required torque.
4. Outdoor Unit Cable Connection (see previous page)
-31-
Loading ...
Loading ...
Loading ...