Loading ...
Loading ...
Loading ...
31
INSTALLATION
Check the appliance is electrically safe when you have nished.
Fitting the cooling fan box
1. Remove the six screws where the cooling fan box will be
xed Fig. 12.3.
2. The shape of the molex plug should match the socket.
Gently connect the molex plug to the molex connector
socket Fig. 12.4.
3. The cooling fan has two tabs which connects to the
slots underneath the ue vent. Gently align the cooling
fan box tabs to the slots underneath the ue vent Fig.
12.5.
4. Replace the six screws Fig. 12.6.
Before tting the side panels, it is recommended
that the required height of the range is set. This will
simplify the Side Panels tting procedure.
Setting the height
You are recommended to use a spirit level on the
cooktop to ensure the range is level.
The front feet and rear rollers can be adjusted to level the
range (Fig. 12.7).
1. To adjust the height of the rear of the range, t a 13 mm
adjustable or socket wrench onto the hexagonal
adjusting nut.
2. Rotate the nut – clockwise to raise – counter-clockwise
to lower. Make sure to lower BOTH REAR ROLLERS.
3. To set the front turn the feet bases to raise or lower.
Fig. 12.3
Fig. 12.4
Fig. 12.5
Fig. 12.6
Fig. 12.7
Loading ...
Loading ...
Loading ...