Loading ...
Loading ...
Loading ...
press button C to switch the input source.
Bluetooth codec switch: when the BTA30 Pro is in TX mode and connected to a
Bluetooth device, short press button D to switch the Bluetooth codec.
Connecting state: if PAIR1 is connected, Light A will be on; if PAIR2 is connected,
Light B will be on; if PAIR1 and PAIR2 are connected at the same time, Light A and B
will be simultaneously on.
aptX LL First
In TX mode, double press button D after the device is connected, so to enable aptX LL
First. Under this state, other Bluetooth codecs will be disabled except for aptX LL and
SBC.
Double press button D again to disable aptX LL First. Light Q will stay constantly on
following the corresponding Bluetooth codec after the device is reconnected. At this
time, all supported codecs will be enabled. Short press button D to successively
switch the codec.
How to connect the BTA30 Pro to two Bluetooth devices simultaneously
RX (Bluetooth receiving): first connect the BTA30 Pro to Device 1, and hold PAIR1 for
about 3s to enter the pairing mode again. On Device 2, search for "BTA30 Pro" and
complete the connection. Back to Device 1, select "FiiO BTA30 Pro" in the Bluetooth
device list and complete the reconnection. You could also restart the BTA30 Pro after
a successful pairing with Device 2, so the BTA30 Pro can be connected to two
Bluetooth devices simultaneously.
TX (Bluetooth transmitting): connect the BTA30 Pro to the Bluetooth receiving
device, Device 1 (PAIR1 is prior as default), and hold button C for about 3s to enter the
pairing state again. The BTA30 Pro will automatically search for Device 2 and start to
pair with it.
Note: When working in LDAC and aptX LL codec in TX mode, the BTA30 Pro cannot be
connected to two Bluetooth devices simultaneously.
Loading ...
Loading ...