Electrolux E2CM1-200W 1.25l Create 2 Drip Coffee Maker

INSTRUCTION BOOK - Page 4

For E2CM1-200W.

PDF File Manual, 19 pages, Read Online | Download pdf file

E2CM1-200W photo
Loading ...
Loading ...
Loading ...
4 www.electrolux.com
AR
ID
TH
VN
EN
25. This appliance is intended to be used in household and similar applications such as:
– staff kitchen areas in shops, offices and other working environments;
– farm houses;
– by clients in hotels, motels and other residential type environments;
– bed and breakfast type environments.
26. Do not use outdoors.
27. Save these instructions.
BEFORE FIRST USE
Check that all accessories are complete and the unit is not damaged. Add clean water up to maximum
level to brew several times without coffee powder according to the steps below, and then discard the
water. Wash the detachable parts thoroughly with warm water.
USING YOUR COFFEE MAKER
1. Open the water tank lid and fill the water tank with cold drinking water. The water level should not
exceed MAX level as indicated on water gauge.
2. Add coffee powder into permanent filter. Usually a cup of coffee needs a level spoon of coffee powder,
but you may adjust according to personal taste. Close the funnel holder, a click sound will be heard
when the funnel holder is closed completely.
3. Insert the carafe on warming plate horizontally.
4. Plug the power cord into the outlet.
5. Pressing the switch down, the indicator will be illuminated. The appliance will begin working.
Note: during brewing process you may remove the carafe to serve for duration of not exceeding 30
seconds, and the coffee maker can stop dripping automatically. If the serve time exceeds 30 seconds
the coffee will overflow the funnel.
6. Upon completion of brewing coffee, that is one minute later after the coffee stops dripping out, you can
remove the carafe, pour and serve.
Note: the brewed coffee you get will be slightly less than the water you have added as some water is
absorbed by coffee powder. DO NOT touch cover, warming plate and so on when operating as they
are very hot.
7. When the process is finished, if you do not want to serve immediately, keep the switch on, the coffee
can be kept warm in the warming plate for 40 minutes and the appliance will be cut off automatically
after 30 minutes. For an optimum coffee taste, serve it just after brewing.
8. Always turn the coffee maker off and disconnect the power supply after use.
Note: Be careful when pouring the coffee out, otherwise you would be hurt as the temperature of coffee
just finished is high.
CLEANING AND MAINTENANCE
CAUTION: Always unplug the product from electrical outlet and allow the warming plate to cool
completely before cleaning it. Never immerse the unit or power cord into water or any other liquid for
cleaning.
1. Clean all detachable parts after each use in hot, sudsy water.
2. Wipe the products exterior surface with a soft, damp cloth to remove stains.
3. Water droplets may buildup in the area above the funnel and drip onto the product base during
brewing. To control the dripping, wipe off the area with a clean, dry cloth after each use of the product.
4. Use a damp cloth to gently wipe the warming plate. Never use abrasive cleaner to clean it.
5. Replace all parts and keep for next use.
REMOVING MINERAL DEPOSITS
To keep your coffee maker operating efficiently, periodically you should clean away the mineral deposits
Loading ...
Loading ...
Loading ...