Loading ...
Loading ...
Loading ...
Network Camera User Manual
78
Day/Night Switch
Day: the camera stays at day mode.
Night: the camera stays at night mode.
Auto: the camera switches between the day mode and the night mode according to
the illumination automatically. The sensitivity ranges from 0 to 7, the higher the
value is, the easier the mode switches. The Filtering Time refers to the interval
time between the day/night switch. You can set it from 5s to 120s.
Scheduled-Switch: Set the start time and the end time to define the duration for
day/night mode.
Triggered by alarm input: The switch is triggered by alarm input. You can set the
triggered mode to day or night.
Smart Supplement Light: Set the supplement light to ON, and Auto and Manual
are selectable for light mode.
Select Auto, and the supplement light changes according to the actual luminance.
E.g., if the current scene is bright enough, then the supplement light adjusts itself
to lower power; and if the scene is not bright enough, the light adjusts itself to
higher power.
Select Manual, and you can adjust the distance of the supplement light. There are
four supplement lights and you can adjust the distance for the each light. If the
object is near the camera, the device adjusts the supplement light to lower power,
and the light is in higher power if the object is far away.
Loading ...
Loading ...
Loading ...