Loading ...
Loading ...
Loading ...
Network Camera User Manual
38
1. Enter the DST configuration interface.
Configuration > System > System Settings > DST
DST Settings Figure 6-8
2. Select the start time and the end time.
3. Select the DST Bias.
4. Click Save to activate the settings.
Configuring External Devices 6.2.6
Purpose:
For the device supported external devices, including the wiper on the housing or the
LED light, you can control them via the Web browser. External devices vary
according to the different camera models.
Steps:
1. Enter the External Device configuration interface.
Configuration > System > System Settings > External Device
External Device Settings Figure 6-9
2. Check the Enable Supplement Light checkbox to enable the LED Light.
3. Move the slider to adjust the low beam brightness and high bean brightness.
Loading ...
Loading ...
Loading ...