Loading ...
Loading ...
Loading ...
5
ASSEMBLY
1. Connect the hose (9) to the
vacuum by inserting the hose
connector (12) into the suction
inlet (13). You will hear a ‘click’ when
it is securely in place
2. Attach the extension wands (3)
together by inserting one into the
other. Twist slightly to tighten the
connection
3. Connect the hose handle (8) to the
end of the extension wand and twist
slightly to tighten
4. Connect the floor nozzle (1) to the
other end of the extension wand and
twist slightly to tighten
5. Once assembled, you can store
your vacuum by inserting the
storage clip (located on the back of
the floor nozzle) into the storage
slot (20) on the rear of the vacuum
OPERATIONS
POWER CORD
The power cord (21) is located at the rear of
the vacuum. Gently pull out the power cord.
Stop pulling the cord when the yellow line is
visible. There is also a red line which
indicates the end of the usable cord. Do not
pull the power cord out beyond the red line.
AUTO-CORD REWIND
Your vacuum is equipped with an automatic
cord rewind. When cleaning is finished,
press the power button OFF and grasp the
plug to disconnect from the electrical outlet.
Hold the plug and press the auto-cord rewind
button to rewind the cord automatically.
POWER BUTTON
Turn the power ON or OFF by pressing
lightly downward on the power button.
1.
2.
3.
4.
The power cord retracts very quickly.
Take care to avoid injury.
!
CAUTION:
Auto cord
rewind
Loading ...
Loading ...
Loading ...