Loading ...
Loading ...
Loading ...
Baffle Installation Side View
Step 10: Install baffle filters
Install baffle filters; refer to picture at left for the following three steps:
1.Angle baffle filter toward back of hood.
2.Lift a baffle filter up above horizontal level.
3.Slide forward into slot behind the front of hood.
4.Slide the installed baffle filter to either left or right until it stops.
5.Repeat step 1 to 4 to install the next ones, make sure you slide to opposite direction from
the previous installed filter.
To remove the baffle, please reverse the process.
NOTE: The middle filter has to be installed last where it should be taken out first when you
want to remove other filters.
STEP 9: INSTALL OIL TUNNEL OR OIL CONTAINER (NOT AVAILABLE FOR ALL MODELS)
Drop oil tunnel into recess support near rear of hood. Refer to the left picture
Oil Tunnel
Side View
Loading ...
Loading ...
Loading ...