Summit ACR1602GLHD 24" Wide Upright Healthcare Refrigerator

User Manual - Page 7

For ACR1602GLHD.

PDF File Manual, 15 pages, Read Online | Download pdf file

ACR1602GLHD photo
Loading ...
Loading ...
Loading ...
6
The appliance should always be plugged into its own individual electrical outlet which has a voltage rating
that matches the rating label on the appliance. This provides the best performance and prevents
overloading house wiring circuits that could cause a fire hazard from overheating.
Never unplug the appliance by pulling on the power cord. Always grip the plug firmly and pull it straight
out from the receptacle. Repair or replace immediately all power cords that have become frayed or
otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either
end. When moving the appliance, be careful not to damage the power cord.
Extension Cord
Because of potential safety hazards under certain conditions, it is strongly recommended that you do not
use an extension cord with this appliance. However, if you must use an extension cord, it is necessary
that it be a UL/CUL-Listed, 3-wire grounding type appliance extension cord having a grounding type plug
and outlet and that the electrical rating of the cord is 115 volts and at least 10 amperes.
Reversing the Door Swing of your Appliance
This unit has the capability of having the door open from either the left or right side. The unit is delivered
with the door opening from the left side. Should you desire to reverse the opening direction, please follow
the reversal instructions shown below.
NOTES:
All parts removed must be saved to allow the door swing to be reversed.
Some models may not be reversible in the field
1.
Remove the bottom hinge by unscrewing the six screws, and firmly hold the door when
removing the screws (Pic 1)
2.
Gently pull the door down and remove it from the top hinge and place it on a padded surface to
avoid damage. Then unscrewing the screw, move the door closer to the other side. (Pic 1, 3)
3.
Unscrew the top hinge pin from the unit and reinstall it on the other side. (Pic 2)
4.
Relocate the door to the designated position, then screw the bottom hinge on the left, and tighten
it after the door is leveled. (Pic 3)
NOTE: All models are shipped with
self-closing doors by default, should
you choose to reverse the door swing
of the appliance, the door will no
longer be self-closing.
Loading ...
Loading ...
Loading ...