Loading ...
Loading ...
Loading ...
OPERATING THE AIR COOLER
service@lifepluspro.com
Natural: Natural setting provides a soft and comfortable environment with a selection of
low, medium and high speed.
Sleep: When the "Speed" Mode is at high level, the sleep function will run at high-speed
natural wind for 30 mins, then switch to medium-speed natural wind for 30 mins, and then
keep running at low-speed natural wind.
When the "Speed" Mode is at medium level, the sleep function will run at medium-speed
natural wind for 30 mins, then switch to low-speed natural wind and keep running at low-
speed natural wind.
When the "Speed" Mode is at low level, the sleep function will keep running at low-speed
natural wind.
4. Timer
Press "Timer" button to set the fan between 1-12 hours, the indicator light will show the
selected time and the unit will operate until the preset time. Continuously press the button
to your desired running time.
To cancel the timer, simply press the button until the indicator shows "00".
5. Swing
Press "Swing" button to change the wind direction. The swing icon will appear on the screen
when the function is activated. Press the button again to stop the oscillation. The vertical
direction of air flow can be adjusted manually by directing the outlet louvers up and down.
6. Cooler
Press this key to activate the air cooler function. Water pump will take the water from the
tank and pour it onto the cooling pad. Cooling pad absorbs the heat of the water and
evaporated air is blown out through t
he fan. The cool breeze by the cooler drops the
temperature and creates a relaxing cooling effect.
Caution:
If the water level is low or there is no water in the tank, do not activate the "Cooler"
function.
Check the water level first and add clean water if needed, also to replace the stale water. It is
recommended to replace water in the tank at least once a week.
7. Auto Lights Off
If there is no operation after 1 minute, the lights on the control panel will automatically turn
off. And press any button to turn on the lights.
Insert the plug into the electrical outlet. Press the "On/Off" button to turn the unit "ON". The
LED indicator automatically shows the room temperature and shifts the fan to standby mode.
The functions of the unit can be controlled via control panel or by remote.
1. On/Off
Pressing the "On/Off" button on the control panel or pressing the "On/Off" button on the
remote control will turn the unit "ON" at intermediate speed. After few minutes, the fan will
drop to show speed or to the pre-programmed memory setting. To switch back the standby
mode, simply press the "On/Off" button on control panel or press the "On/Off" button on
remote control.
2. Speed
Press this key to choose between high, medium and low fan speed. Each tim
e the "Speed"
button is pressed, an icon will appear on the LED screen indicating the current speed level.
3. Wind
Press the "Wind" button to choose the type. Indicator light will display the selected type of
wind;
Normal: A continuous wind blow that can be adjusted to low, med and high speed.
3
4
Loading ...
Loading ...
Loading ...