Loading ...
Loading ...
Loading ...
Before using for the first time
23
Setting the water hardness
The display changes to the screen for
setting the water hardness.
- The dishwasher must be pro-
grammed to the correct water hard-
ness for your area.
- Your local water authority will be able
to advise you of the water hardness
level in your area.
- Where the water hardness fluctuates,
e.g., between 10-16 gpg (10–15°dH),
always program the dishwasher to
the higher value (16 gpg (15°dH) in
this example).
It is useful to know your water hardness
so that you can provide the service
technician with this information in the
event of any service calls.
Enter the water hardness below:
____________gpg (°dH)
The dishwasher is programmed at the
factory for a water hardness level 1 gpg
(1°dH).
Set the water hardness level in your
area and confirm with OK.
See “Water hardness” under “Set-
tings” for more information.
Activating AutoDos
The display changes to the settings
screen for AutoDos (see “Automatic dis-
pensing/AutoDos” under “Detergent”).
Even if you do not wish to use Auto-
Dos, you must remove the transport
locking device from the PowerDisk
compartment before running the first
program (see “Activating AutoDos”
under “Detergent”).
You can activate AutoDos.
If you do not wish to use AutoDos, you
can manually dispense the detergent
via the detergent compartment (see
“Manual detergent dispensing” under
“Detergent”).
Select the setting you want and con-
firm with OK.
This setting applies to all programs and
can be changed at any time using
theAutoDos button.
Loading ...
Loading ...
Loading ...