Loading ...
Loading ...
Loading ...
13. TROUBLESHOOTING
Problem Solution Problem Solution
1. Check whether the air compressor's battery
level is sufficient.
2. Check whether the air hose is leaking.
3. Check whether both ends of the air hose are
securely connected.
4. Check whether the item that is being inflated
is leaking
1. Check whether the air compressor's battery
level is sufficient.
2. Check whether the pressure of the item
being inflated exceeds the preset pressure.
Make sure the air compressor is set to the
correct mode. Manual mode has a blank display
without any icons and allows you to adjust the
preset value within the range of 3 - 150 psi.
The pressure of low-pressure inflatables
including balloons is too low to be measured.
Slow inflation speed
Air leakage after
connecting the air
tube
The battery level
indicator is different
when inflating
compared to standby
state
The battery level
indicator doesn’t
show on the screen
after charging
The inflator cannot
charge other devices.
None of above. The
inflator doesn’t react
with any input
Make sure the air hose is securely connected.
The lithium battery's voltage level significantly
drops when discharging power, causing the
battery level indicator to have a different display
when inflating compared to standby state. This
is normal.
Use a certified adapter and the included charging
cable, and try charging again.
Simultaneously press the light button and mode
button to restart the inflator.
1. Make sure the remaining battery level is
sufficient.
2. The discharging output is 5V/2A. Make sure
this output meets the requirements of the
charged device.
3. The inflator can not charge other devices
while inflating.
Air compressor
turns on but
does not inflate
Unable to increase
or decrease the
preset pressure
The inflator inflates
normally but the
displayed pressure
is zero
- 13 - - 14 - - 15 - - 16 -
Loading ...
Loading ...
Loading ...