Hikvision DS-2TD2866-50/V1 User Manual

Loading ...

Thermal & Optical Bi-spectrum Network Bullet / Turret Camera User Manual

5. Click Stop Drawing to finish drawing or click Clear All to clear all of the areas you

set without saving them.

6. Set the value of Active Zoom Ratio on your demand, and then the shield will only

appear when the zoom ratio is greater than the predefined value.

7. Click Add to save the fire source detection shield, and it will be listed in the Fire

Source Detection Shield List area; you can select a region and click Delete to

delete it from the list; you can also define the color of the regions.

8. Check the checkbox of Enable Fire Source Detection Shield to enable this

function.

Note: You are allowed to draw up to 24 areas on the same image.

9.3 VCA Configuration

9.3.1 Configuring Basic Settings

Purpose:

You can enable to display the VCA information on stream or target information on

alarm picture and set the snapshot quality and resolution.

Steps:

1. Enter Configuration > VCA > Basic Settings.

2. Check the checkbox to enable the Intelligent Analysis. And you can view the

current version for the perimeter protection.

3. Check the desired checkbox of display settings and select the snapshot quality

and resolution.

Loading ...

Hikvision DS-2TD2866-50/V1 Thermal & Optical Bi-spectrum Network Bullet Camera