Loading ...
FUNCTION
INSTALLATION
WIRING DIAGRAM
• Can identify day and night: The consumer can adjust working state in dierent ambient light. It
can work in the daytime and at night when it is adjusted on the “sun” position (max). It can work
in the ambient light less than 3LUX when it is adjusted on the “moon” position (min). As for the
adjustment pattern, please refer to the testing pattern.
• Time-Delay is added continually: When it receives the second induction signals within the first
induction, it will restart to time from the moment.
• Adjustable Time Delay: the length of time delay could be set according to the customers’ re-
quirement, the minimum time of this item is 10sec±3sec, and the maximum is 3min±30sec.
• Switch o the power.
• Unscrew the plastic screw nut and remove the PC lampshade.(refer to figure1)
• Pass the wire through the hole in the bottom and connect the power wire into connection-wire
column according to the connection-wire diagram. Install the sensor lamp in the position
where you need with inflated screws. (refer to figure2)
• Switch on the power and test it.
Remarks: You can slide the switch to adjust the color temperature to 3000K, 4000K or 6000K
WARNING
1. Please make sure to turn o the power before starting the installation.
2. Installation must be performed by a qualified person.
3. The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole
luminaire should be replaced.
4. For Indoor use only.
Good Sensitivity
Figure 1 Figure 2
Poor Sensitivity
Loading ...
Loading ...