Loading ...
Loading ...
Loading ...
3
ASSEMBLY INSTRUCTIONS
Important: Assemble the fan before plugging it in.
1. Screw threaded outer pole into threaded base. Hand tighten until firmly
secured. Use no tools.
HEIGHT ADJUSTMENT: Loosen the height adjustment knob (counter-
clockwise), adjust height to desired position and tighten the knob
(clockwise).
2. Loosen the set screw on the back of the control box and set the control box
onto the inner pipe. Then tighten the set screw to secure the control box and
motor head to the inner pipe. When adjusting the inner pipe, always keep
the waterproof cover matched with the height adjustment knob.
3. Unscrew the guard lock nut by turning it counter-clockwise. Mount the rear
grill (with the handle in the upright position) to the motor housing by
matching its 3 holes to the 3 round pins on the front motor housing. Reinstall
and tighten the guard lock nut.
4. Insert the fan blade onto the motor shaft by matching the slot of the blade
with the D-shaped cut out on the motor shaft. Secure the blade by screwing
the blade cap onto the shaft counter-clockwise.
5. Attach the fan shroud to the rear grill by snapping it onto the rear grill. The
screw at the bottom of the fan shroud may have to be loosened slightly
before attempting to snap on the fan shroud to the rear grill. Start by at the
top and work your way to the bottom. The fan shroud will snap on to the rear
grill. There is a screw on the bottom of the fan shroud that can be tightened
to hold it in place.
6. Push and twist one end of the 6-foot hose into the Swivel Adapter. Insert
screen washer into swivel adapter and attach to outdoor hose or spigot.
IMPORTANT INFORMATION
THIS FAN IS INTENDED FOR OUTDOOR USE BUT MAY BE USED INDOORS WITHOUT
THE MISTING FEATURE. Place the fan on a level surface near an electrical outlet. Place the
fan out of the reach of children. Do not insert anything into the grill. If moving the fan to a
different location, switch it off and unplug from the socket.
Loading ...
Loading ...
Loading ...