Loading ...
Loading ...
Loading ...
DS-K1107A Series Card Reader • User Manual
III
Applicable Models
This manual is applicable to the models listed in the following table.
Series
Model
Card Reader
DS-K1107AM
DS-K1107AS
DS-K1107AE
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Safety Instructions
All the electronic operation should be strictly compliance with the electrical safety regulations,
fire prevention regulations and other related regulations in your local region.
Please use the power adapter, which is provided by normal company. The power consumption
cannot be less than the required value.
Do not connect several devices to one power adapter as adapter overload may cause over-
heat or fire hazard.
Please make sure that the power has been disconnected before you wire, install or dismantle
the device.
When the product is installed on wall or ceiling, the device shall be firmly fixed.
If smoke, odors or noise rise from the device, turn off the power at once and unplug the
power cable, and then please contact the service center.
If the product does not work properly, please contact your dealer or the nearest service
center. Never attempt to disassemble the device yourself. (We shall not assume any responsibility
for problems caused by unauthorized repair or maintenance.
Symbol
Description
Provides additional information to emphasize or supplement
important points of the main text.
Indicates a potentially hazardous situation, which if not avoided,
could result in equipment damage, data loss, performance
degradation, or unexpected results.
Indicates a hazard with a high level of risk, which if not avoided, will
result in death or serious injury.
Loading ...
Loading ...
Loading ...