Loading ...
Loading ...
Loading ...
5
•
Turn the adjustable leg up to the base to avoid damage.
• Tape the door shut.
• Be sure the appliance stays secure in the upright position during transportation. Also protect the
outside of the appliance with a blanket or similar item.
Energy saving Tips
•
The appliance should be located in the coolest area of the room, away from heat producing
appliances and out of direct sunlight.
• Try not to open the door too often, especially when weather is wet and hot.
TROUBLESHOOTING GUIDE
You can solve many common problems easily, saving you the cost of a possible service call. Try the
suggestions below, if problem persists, please contact Sunpentown at 1-800-330-0388:
PROBLEM POSSIBLE CAUSE
Unit does not operate. Not plugged in.
The appliance is turned off.
The circuit breaker has tripped or a fuse has blown
Unit is not cold enough. Check the temperature control setting.
External environment may require a higher setting.
The door is opened too often.
The door is not closed completely.
The door gasket does not seal properly.
Turns on and off frequently. The room temperature is hotter than normal.
A large amount of contents has been added to the unit.
The door is opened too often.
The door is not closed completely.
The temperature control is not set correctly.
The door gasket does not seal properly.
The light does not work. Not plugged in.
The circuit breaker tripped or a blown fuse.
The bulb has burned out.
The light button is “OFF”.
Vibrations. Check to assure that the unit is level.
The appliance seems to make too much
noise.
Some noise may come from the flow of the refrigerant, which
is normal.
As each cycle ends, you may hear gurgling sounds caused
by the flow of refrigerant in the unit.
Contraction and expansion of the inside walls may cause
popping and crackling noises.
The unit is not level.
The door will not close properly. The unit is not level.
The door was reversed and not properly installed.
The gasket is dirty.
The shelves are out of position.
Loading ...