Loading ...
Loading ...
Loading ...
13
FINAL INSTALLATION
1. Align the canopy (E) over the loosened mounting
bracket screws (U) preassembled on mounting
bracket (D). Place the keyholes of the canopy (E)
onto the mounting bracket screws (U) and rotate the
canopy (E) clockwise.
2. Secure the canopy (E) with the mounting bracket
screws (U) previously removed (Step 4, page 8).
Tighten all mounting bracket screws (U) securely.
3. Partially insert the blade screws (BB) along with the
blade washers (CC) and rubber washers (DD) through
the blade (S) and into the blade arm (R). Tighten
each blade screw (BB) with a Phillips screwdriver (not
included), starting with the one in the middle. Repeat this
step for the remaining blades (S) and blade arms (R).
Hardware Used
BB
Blade Screw x 15
Blade Washer x 15
Rubber Washer x 15
1
2
E
E
U
D
Note: Closemount installation will not have the downrod (A), yoke cover (N) or canopy cover (F).
3
BB
CC
DD
S
R
CC
DD
Loading ...
Loading ...
Loading ...