Loading ...
Loading ...
Loading ...
5
2.3 Installation of Type III Camera
2.3.1 Ceiling Mounting without Junction Box
Steps:
1. Paste the drill template (supplied) to the place
where you want to install the camera.
2. (Optional) For cement ceiling, drill the screw holes
with a 5.5 mm drill and insert the supplied wall
plugs.
Figure 2-11 Drill Template
3. Attach the gang box to the ceiling and secure it with
three PA4 × 25 screws (supplied).
Figure 2-12 Attach Gang Box to Ceiling
4. Fit the camera onto the gang box.
Figure 2-13 Fit Camera
5. Turn the camera clockwise until it snaps into the
gang box.
Figure 2-14 Snap Camera into Gang Box
6. Connect the power cord and video cable.
7. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the camera according to the figure
below.
Rotation Position
[0° to 360°]
Pan Position
[0° to 360°]
Tilt Position
[0° to 75°]
Figure 2-15 3-Axis Adjustment
1). Rotate the enclosure to adjust the pan position
[0° to 360°].
Loading ...
Loading ...
Loading ...