Loading ...
Loading ...
Loading ...
INSTALLING THE UNIT
9
© 2021 SAPPHIRE
SAPPHIRE Beverage Center/Refrigerator
Operator’s Manual
REQUIRED CABINET OPENING
!
WARNING
Fire/Explosion Hazard
DO NOT install in spaces containing gasoline engines, fuel tanks or fuel line fi ttings. This device
does not meet federal requirement for ignition protection. Failure to comply could result in injury
or death.
A built-in installation will allow you to install the appliance under a counter or in a kitchen cabinet if you
respect the required clearance space around the appliance. The appliance must be located to allow clearance
for the electrical connection in the rear of the unit.
BUILT-IN CABINET DIMENSIONS
A built-in unit is designed for zero clearance at the top and each side of the unit. The unit uses fan-forced
condenser cooling, which requires air circulation through the lower section of the unit.
OTE: N To ensure proper service access and ventilation, all SAPPHIRE units should not have the grill openings covered. There are no
additional requirements for venting at the top, side or rear of the unit.
SAPPHIRE 24-INCH INDOOR CABINET DIMENSIONS
Recommended location for electrical connection in either adjacent cabinet.
24.00"
(610 mm)
7.00"
(177 mm)
(864 mm)
"
"
"
"
Loading ...
Loading ...
Loading ...