Loading ...
Steps To Test Run Before Installation
IMPORTANT!
Wear gloves to protect against sharp edges.
PLEASE FOLLOW THESE INSTRUCTIONS TO TEST THE
RANGE HOOD BEFORE INSTALLATION FOR ANY DEFECTS
OR SHIPPING DAMAGE:
1.
Remove the range hood and accessories from the
package carefully.
2.
Place the range hood on a flat stable surface,
remove the baffle filter and check for any dents or
damages on the range hood body.
3.
Remove the loosen parts if there's any.
4.
Plug therange hood into a 120V AC power source.
5.
Check each speed variation and pay attention to
the noise level to make sure there isn't any unusual
noise besides it coming from the wind blowing.
Press the Light Button to check the lights.
6.
Verifyallfunctions,asinstructedinPage9,are
working properly.
7.
RefertoRangeHoodTroubleshootinginPage11for
general issues and solutions.
Pleasereadallinstructionscarefullybeforeproceeding
furthertopreventtheriskoffire,electric shock, personal
injury or damage to the range hood. This manual
provides a general insight on the installation and may
not include solutions for all possible issues that may
occur.
In case of this manual destroyed or lost, please visit
https://www.empava.com and download adigital
version.
Installation Overview
1.
Unpack the range hood and check for any physical
damage on thebody.
2.
Testrun the range hood and check if all functions
are working properly. Refer to Page 9 for
functionalities.
DO NOT
install the range hood if it's defective. Contact
the seller immediately.
3.
If all is fine, install the range hood as instructed in
this manual. Refer to Page 7 & 8.
4.
Testrun the range hood again when the installation
is finished. Refer to Page 11 for troubleshooting.
Possible Tools Needed:
•
Marker
/
Pencil;
•
Jig Saw or Reciprocating Saw;
•
Screwdrivers or PowerDrill;
•
Level;
•
Measuring Tape;
•
Knife:
•
Duct
/
Foil Tape;
•
Screws.
2 PEOPLE ARE REQUIRED FOR THE INSTALLATION.
Loading ...
Loading ...
Loading ...